Product Features
Specially formulated for dyed wood veneer, it isolates dye oxidation, effectively delays yellowing of the veneer, and locks in the original dye color.
Coating Process
Sanding → UV primer roller coating/spraying → UV curing → Sanding → UV topcoat roller coating/spraying → UV curing
Precautions
Applications: For painting or spraying various wood products such as indoor tables, chairs, wardrobes, bookshelves, and protective wall panels, as well as rattan products.
Instructions for Use:
Application Methods: Spraying, brushing, or rolling.
Tools: Water-based fiber brush or spraying equipment, dry sandpaper.
Preparation: Mix the paint according to the recommended water-to-finish ratio. Fill defects with water-based anti-cracking paint, white oil-based putty, or water-based anti-nail sealant.
Application: Apply the company's matching primer and topcoat according to the specified process. See the product instruction manual for details.
Application Conditions: Temperature above 8℃, humidity not exceeding 80%.
Drying Time: (Drying conditions: Temperature 25℃, Humidity 50%)
Coating rate will vary depending on coating thickness, board material, application method, board surface roughness, and the final finish.
Special Precautions:
1. Water-based paint products should be protected from freezing in winter. During transportation and storage, the temperature should generally not be lower than 5℃, and the minimum should not be lower than 0℃. Therefore, in northern regions, they should be stored in a heated room in winter to avoid freezing. In summer, avoid direct sunlight or prolonged exposure to high temperatures; the temperature should generally be below 35℃, and they should be stored in a cool, ventilated place to extend shelf life.
2. When brushing, the company's matching water-based fiber brush must be used (ordinary wool brushes should not be used).
3. Water-based paint should be diluted with clean water; generally, pure, uncontaminated tap water is sufficient.
4. It is essential to use the company's water-based wood coating series to avoid adverse paint film conditions.
5. The amount of water to dilute water-based paint should be adjusted flexibly according to local climate conditions, personal habits, application methods, and tools, taking into account the desired effect, to achieve the optimal application viscosity.
6. Before mixing the paint, stir thoroughly, dilute with clean water, filter through a 200-mesh filter cloth, and let stand for 5-10 minutes before use. Seal the container tightly after use to prevent the introduction of harmful substances; store any unused paint in a sealed container promptly.
7. Water-based wood paints are easily contaminated. If sweat or other dirt contaminates the substrate, clean it promptly, otherwise it will affect adhesion and coating results.
8. Under standard conditions, the curing period for the paint film is 7 days. However, the curing period will be extended for thicker coats or in lower temperatures or higher humidity. During the curing period, do not sand, apply heavy pressure, rub, or allow contact with water or other liquids.
9. Keep out of reach of children to avoid accidental ingestion.
10. Maintain cleanliness of the work area. If paint splashes into eyes or other sensitive areas, wash immediately and seek medical attention.
11. During winter construction, it is recommended to turn on heating equipment such as radiators to accelerate drying and improve paint film quality.
12. After completion, clean all tools with clean water promptly.
13. For relevant on-site technical applications, please consult our professional technical engineers.
Storage and transportation requirements: Store in a cool, dry place, with an ambient temperature between 5 and 35℃.
