DEPA.B2 is manufactured from high viscosity index paraffinic base oils, possessing excellent natural de-emulsification properties. Effective additives further enhance the oxidation stability. This general purpose circulating oils are recommended for applications where extra load carrying characteristics provided by additives are not required. Suitable for lubrication of machine guides, bearings and spindles, air line lubrication of machine tools, ring oiled and wick feed bearings, and even light duty gear and hydraulic oils.

Advantages

● Good oxidation stability 

● Good demulsifying property promotes faster water separation. If water is an unavoidable contaminant so that effective lubrication is ensured.

● Long service life.

● High viscosity indexes resist thinning down of the oil at elevated temperatures. 

Typical Data

While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products. 

Take Care

Small details to prevent you from spending money in vain

1. Consult a lubrication expert, use lubricants of the appropriate specification, and try to minimize the types of oil used.

2. Each type of machinery should be marked with a simple diagram with the parts that need oiling, the name of the oil, the oiling cycle, etc., and be assigned to a specific person to avoid using the wrong oil.

3. Before each refueling, the oil pump, oil can and other containers and tools must be cleaned and wiped.

4. Each type of oil should be stored in a dedicated container, and the name of the oil product should be clearly marked on the container to prevent contamination.

5. Before changing the oil, the machinery must be thoroughly rinsed with a solvent. Water-soluble cleaning agents must not be used.