Coatings&Paint
Latex Paint
Latex Paint
Other
Inorganic Coating
Furniture Paints
Polyester Furniture Paint
PU Furniture Coatings
Water-borne Furniture Paint
Other
UV Furniture Coatings
AC Furniture Coatings
Wood Wax Oil
Decorative Wood Paint
Water-borne Decorative Wood Paint
Nitrocellulose Varnish
PU Paint
Other
Architectural Coatings
Exterior Architectural Coatings
Imitation Stone Coatings
Natural Stone Coatings
Textural Coatings
Water-borne Multicolor Coatings
Anti-mildew Coatings
Fire Retardant Coatings
Waterproof Coating
Other
Inorganic Coating
Industrial Coatings
General Industrial Coatings
Anticorrosive Coatings
Marine Coatings
Traffic Coatings
Container Coatings
Pipe Coatings
Automotive Coatings
Floor Coatings
Anti-rust Coatings
Plastic Coatings
Heat Insulation Coatings
Powder Coatings
Other
Coil Coatings
Aerospace Coatings
CM Coatings
Functional Coatings
High-Temperature Resistant Coatings
Fire Retardant Coatings
Thermal Insulation Coatings
High-temperature&Corrosion Resistant Coatings
Thermal Insulation Glass Coatings
Anti-abrasive Coatings
Anti-icing Coatings
Reflective Coatings
Other
Insulating Coatings
Conductive Coatings
Invisible Coating
Ink
Accessory
Putty
Diluent
Moistureproof Agent
Paint Remover
Other
Motar
Sewing Agent
Sealant
Interface Agent
Tile Gule
Art Coatings
Product Description: TAG16TAG17TAG17TAG1TAG12TAG3TAG4TAG5TAG5TAG6 Product Description: TAG16TAG17TAG17TAG17TAG14TAG15 Matte acrylic coating, easy to apply, with strong covering and adhesion, suitable for surfaces of gypsum board, cement, concrete and other structures, as well as fiber wallpaper surfaces or old wall surfaces that have already been painted. TAG19TAG20TAG21TAG22TAG23TAG24 Surface pre-treatment TAG25TAG26TAG27 The painted surface must be dry, clean, and sturdy. Dust, glue, and other debris on the surface of the wall must be thoroughly cleaned. For walls with strong absorption, a water-based wall primer must be applied in advance. TAG28TAG29TAG30TAG31TAG32TAG33 construction method TAG34TAG35TAG36 roller coating, brush coating, spray coating. The water content of the primer or first coat of topcoat shall not exceed 15%, and the water content of the last coat of topcoat shall not exceed 10%. Ensure that the painting environment temperature is above 8 ° C and the humidity is below 70%. TAG37, TAG38, TAG39, TAG40, TAG41, and TAG42 have a coverage rate of approximately 7-9 square meters per liter for TAG43, TAG44, and TAG45. The actual coverage rate varies depending on the roughness and absorption degree of the wall surface. TAG46TAG47TAG48TAG49TAG50TAG51 drying time TAG52TAG53TAG54 depends on factors such as wall absorption and environmental temperature and humidity. In an environment with a temperature of 20 ° C and a humidity of 60%, the second coat can be applied after 2 to 3 hours. TAG55TAG56TAG57TAG58TAG59TAG60TAG61


